Zephyr AK9800 Guía de instalación descargar pdf (Pagina 12)

INSTALLATION

STEP 1

STEP 3

STEP 5

STEP 2

STEP 4

STEP 6 (also refer notes on pg. 16)

1. Remove all contents from box

2. Unscrew and remove bottom grease splash shield

1. Locate electrical connection box knock out from left

rear of hood and pry open with screwdriver

1. Cut out cabinet base opening if necessary. Refer

cut out dimensions previous page.

1. Reinforce cabinet base with 1x2 wood strips if

additional strengthening is required.

2. Unscrew and remove bottom grease splash shield

1. Install damper if required by local codes (not

provided), or install 6“ starting collar (green)**

1. Locate electrical connection box inside

2. Unscrew cover to reveal wiring

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 20 21

Sin comentarios

Zephyr AK9800 Guía de instalación Pagina 12