Zephyr CTP-E 48SX Guía de instalación descargar pdf (Pagina 7)

Installation - Mounting Height & Clearance

DUC T ING

36"

Min 98"-Max 124”

Min 28"-Max 36"

Min 34"-Max 52"

Minimummountheight between range top to hood bot-

tom should be no less than 28".

Maximummountheight should be no higher than 36".

It is importantto install the hood at the proper mounting

height. Hoods mountedtoo low could result in heat

damage and re hazard; while hoods mountedtoo high

will be hard to reach and will loose its performance and

eciency.

If available, also refer to range manufacturer's height

clearance requirements and recommendedhood

mountingheight above range. Always check your local

codes for any differences.

A minimumof 6” round or 3-1 /4 x 10"

rectangular duct work must be used to maintain

maximumair ow eciency with the 600 cfm

internal blower. A minimumof 10” to 8” round must

be used with the 1000 cfm external blower.

Always use rigid type metal duct work only.

Flexible ducts could restrict air ow by up

to 50%.

Use calculation worksheet to compute total

duct work.

ALWAYS, when possible, reduce the number

or transitions and turns. If a reducer is used,

install a long reducer instead of a pancake

reducer. Reduce duct size as far away from

opening as possible.

If turns or transitions are required:

Install as far away from opening and as far

apart, between 2, as possible.

Minimum Duct Size:

Round - 6” minimumat 600 cfm

Round - 10” to 8” minimum

1000 cfm

Rect angular - 3 1/4” x 10” minimum only if

using internal blower at 600 cfm. Using

rectangular ductwork will require a transition

adapter (not provided, but readily available at

most hardware stores).

DAMAGE-SHIPME

NT/ IN

TA L

AT I O N :

• Please fully inspect unit for damage

befor e installation.

• If the unit is damaged in shipment , return

the unit to the store in which it was bought

for repair or replacement.

• If the unit is damaged by the customer

repair or replacement is the responsibility

of the customer.

• If the unit is damaged by the ins taller (if

other than the customer), repair of replace

ment must be made by arrangement

between customer and installer.

*Minimum ceiling height of 98”. Hood

mounted at 28” above cooking surface.

**Maximum ceiling height of 124". Hood

mounted at 36" above cooking surface.

1 2 3 4 5 6 7 8 9 10 11 12 ... 22 23

Comentarios a estos manuales

Sin comentarios

Zephyr CTP-E 48SX Guía de instalación Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Campanas De Cocina Zephyr CTP-E 48SX